User manual
23 / EN 
Cleaning and Maintenance 
4.1. Instructions 
High temperature inside the 
oven after use 
Danger of burns 
•  Perform cleaning only after letting the 
appliance cool down. 
Improper use 
Risk of damage to surfaces 
•  Do not use a steam jet to clean the 
appliance. 
•  Do not use cleaning products containing 
chlorine, ammonia or bleach on steel parts or 
parts with metallic finishes on the surface 
(e.g. anodizing, nickel or chromium-plating). 
•  Do not use abrasive or corrosive detergents 
on glass parts (e.g. powder products, stain 
removers and metallic sponges). 
•  Do not use rough or abrasive materials 
or sharp metal scrapers. 
•  Failure to clean the oven could 
adversely affect the life of the 
appliance and pose a hazard. 
•  Always remove food residues from the 
oven compartment. 
Improper user 
Danger of explosion/ burns 
•  Do not use detergents with high alcohol 
content or which can release inflammable 
vapours. Subsequent heating could set off an 
explosion inside the appliance. 
Before cleaning the microwave, 
ENSURE THAT THE PLUG IS NOT IN 
THE SOCKET. 
4.2. Cleaning the surfaces 
To keep the surfaces in a good condition, they 
should be cleaned regularly after use. Let them 
cool first. 
4.3. Ordinary daily cleaning 
Always  use  only  specific  products  that  do  not 
contain abrasive or chlorine-based acids. 
Pour the product onto a damp cloth and wipe the 
surface, rinse thoroughly and dry with a soft cloth or 
a microfiber cloth. 
4.4. Food stains and residues 
Do not use metallic sponges or sharp scrapers as 
they will damage the surfaces. 
Use ordinary non-abrasive products with the aid of 
wooden  or  plastic  utensils  if  necessary.  Rinse 
thoroughly and dry with a soft cloth or a microfiber 
cloth. 
4.5. Cleaning the appliance 
Outer surface 
1. Clean the outer surface with a neutral detergent, 
lukewarm water and a damp cloth. 
2. Do  not  allow  water  to  pass  through  the  outer 
structure. 
Inside 
1. After  each  use,  clean  the  inside  walls  with  a 
damp cloth. 
2. Do not allow water to enter the ventilation holes 
of the microwave oven. 
3. If it has been some time since the last cleaning 
and the cavity of the microwave oven is dirty, put 
a  glass  of  water  on  the  tray  and  connect  the 
microwave at maximum power for 4 minutes. The 
steam that is released will soften the dirt, which 
will be easy to clean with a soft cloth. 
  Important! The appliance should not be cleaned 
with steam cleaning machines. The steam may 
reach  the  charged  parts  and  cause  a  short 
circuit. 
  The most soiled stainless steel surfaces may be 
cleaned using a non-abrasive cleaning product. 
  Then they should be rinsed with hot water and 
dried well. 
4. Clean  accessories  after  each  use.  If  they  are 
very dirty, steep them first and then use a brush 
and a sponge. The accessories may be washed 
in the dishwasher. Ensure that the rotating plate 
and respective base are always clean. 










