Use and Care

Instructions for the User

PROBLEM POSSIBLE CAUSE PROBABLE SOLUTION

- turn the regulator to a lower

setting (1-2) to increase the

temperature inside the appliance

slightly;

- cooling temperature regulator

device set too high (meaning

lower temperature inside the

appliance);

- check that the gaskets are

providing an airtight seal;

- open the door less often and for

shorter times;

- rise in atmospheric temperature

and humidity;

Too much ice forming on back wall

of minibar section (layer of frost

more than 3/8” - 1 cm thick):

- door opened often or for long

periods.

- do not place hot food or drinks

inside the absorption minibar.

Front of cabinet hot to the touch: - the absorption minibar is operating

normally. Inside the cabinet there

is a surface cooling system

designed to restrict the formation

of condensation in the area where

the door gasket closes.

AFTER-SALES SERVICE – READING THE NAMEPLATE.

IF THE PROBLEMS WITH THE PRODUCT YOU HAVE PURCHASED ARE NOT AMONGST THOSE DESCRI

BED

ABOVE AND IF YOU NEED MORE INFORMATION, PLEASE CONTACT THE AUTHORISED AFTER-

SALES

SERVICE. YOU WILL FIND THE ADDRESS AND TELEPHONE IN YOUR LOCAL TELEPHONE DIRECTO

UNDER SMEG.

TO SPEED UP THE SERVICE, PLEASE BE READY TO INFORM OUR CALL SERVICE OPERATORS OF

THE

MODEL OF THE PRODUCT YOU HAVE PURCHASED AND THE SERIAL NUMBER MARKED ON THE

NAMEPLATE INSIDE THE BODY OF THE REFRIGERATOR. THANK YOU IN ADVANCE FOR YOUR ASSISTANCE.