Instruction Manual

Installation
25
EN
appliance can be used in different
temperature conditions.
• The appliance must not be installed near
heat sources. If this is not possible,
insulate properly.
• To ensure proper ventilation for your
appliance allow 1 ¼” (3 cm) space on
each side.
• If installed underneath wall units, at least
3” (7.6 cm) clearance must be left.
• Ensure that the appliance is located with
sufficient space for the door to open and
for the internal drawers and shelves to be
removed, if necessary. Leave 14 ½”
(36,8 cm) minimum on the hinge side to
allow for the door to swing open.
Spacers
To ensure proper cooling of the condenser,
the appliance must not be placed too close
to the wall. To avoid this, the product is
equipped with two plastic spacers, which
must be positioned on the back of the
appliance.
Positioning
Position the appliance on a firm, level
surface.
The appliance has two small wheels on the
back to allow it to be moved and
positioned more easily.
In any case, we recommend moving the
appliance very carefully in order to avoid
damaging the floor (especially in the case
of wooden floors).
Class Room temperature
SN (Subnormal) + 50°F to + 89°F
N (Normal) + 61°F to + 89°F
ST (Subtropical) + 64°F to + 100°F
T (Tropical) + 64°F to + 109°F