Operation Manual

Instructions for the user
49
10.9 Replacing the inside light
Before replacing the bulb, make sure that its failure to operate is not simply because it has become loose
inside the lamp holder. In any case, whether you wish to check that the bulb is inserted correctly or you
wish to change it, for safety reasons, you must first remove the plug from the power outlet (or turn
of the main switch).
Fig. 18
To replace the inside light bulb (1) carry out the following steps in the order provided below:
- Press the sides of the lightning device cover (2) in order to release the fastenings of the cover A and
pull it downwards (3). Remove the cover (4).
- Replace the bulb with another 15 W bulb of the same type, with the bulb holder E14 .
- Once you have replaced the light bulb, put the closing hook of the cover in position B and press
upwards until it is properly secured.
- Connect the appliance to the electrical power outlet (or switch on the main switch).