Instruction manual

User instructions

ADJUSTING THE RINSE AID DISPENSER MODE

To access the programming environment it is necessary that the dishwasher

is switched on and the door is open, at this point you must:

 press the PROGRAM DELAY button until the b symbol appears

on the display, followed by the number currently set (e.g. b3)

 Then press the PROGRAM DELAY button button several times

to select the required dosage according to the following table:

RINSE AID ADJUSTMENT TABLE

0 – not

dispensed

b0 All indicator lights off

Minimum. 2 ml b1 One indicator light on

3 ml b2 Two indicator lights on

4 ml b3 Three indicator lights on

5 ml b4 Four indicator lights on

Maximum. 6 ml b5 Five indicator lights on

Default settings: b4 - 5 ml

After carrying out the adjustment or displaying the current setting, if you

do not touch the button for a few seconds the dishwasher will

automatically exit from adjustment mode and return to the standard

operating mode.

 The amount of rinse aid must be increased if the washed dishes

appear dull or feature circular stains.

 If, on the other hand, the dishes are sticky or have white streaks, it is

necessary to reduce the rinse aid setting.