Instruction manual

User instructions

LANGUAGE SELECTION

1-Switch on the dishwasher

2-Select a wash program (not Special Programs)

3-Press and hold the “half load” button until the currently selected language

appears on the front display.

Press the button again to scroll through the available languages. When the

required language appears on the display, select it by simply waiting a few

seconds without selecting any other options (the name of the chosen

language appears on the display) or switch off the dishwasher by pressing

the on/off button.

N.B.:

- With the door open, the display switches off after about

10 seconds with no commands.

- With the door closed, if the dishwasher is programmed but the start

is not confirmed (cycle not confirmed, program interrupted, start

not confirmed…) the name smeg appears on the display after about

seconds.

WASH PROGRAM SELECTION AND SWITCHING-ON

For selection of the most suitable program for the dishes to be washed,

refer to the table below, which specifies the recommended type of wash,

also considering the type of dishes and the degree of soiling.