Instruction manual

User instructions

ADJUSTING THE UPPER BASKET

The height of the top basket can be adjusted to allow large dishes or pans

to be placed in the bottom basket.

The adjustment procedure may be type A or B, depending on the

dishwasher model purchased.

Version A: pull-out with adjustment in two positions.

 Pull out both the basket guides.

 Remove the stops, first releasing them as shown in the diagram.

 Pull out the basket.

 Fit the upper or lower pair of wheels into the guide, depending on the

setting required;

 Return the stops to their original position.

The left hand and right hand sides of the basket must always be set at

the same height

Version B: with adjustment in three positions on both sides.

The sides of the basket must always be set at the same height.

 Raise the basket by pulling on the top edge (1), to the first or second

catch depending on the height required.

 To lower the basket, first release it by pulling the release lever (2).

Adjustment is also possible with the basket loaded, but in this case when

lowering the basket it should be held steady with one hand to avoid

knocking the dishes.