FAQ

Troubleshooting
Fault
Possible cause
Solution
The dishwasher does not
start
No power
Check the main power
supply.
Check the power supply cable.
Tableware not dry
No rinse aid
Add rinse aid
A program that does not
provide for final drying has
been used
Refer to the programs table
Presence of water in the
cavities
When loading, be careful of the
position of the tableware, which
must not be perfectly vertical, but
oblique
The tableware has been
removed too soon
Wait at least 20 minutes after the
end of the program
Use of ecological rinse aid
Ecological products may be less
efficient than traditional products
Plastic tableware
Plastic has a lower thermal
accumulation; therefore, drying is
rather difficult
The combined detergent
used does not guarantee
good drying results
Use a different type of combined
detergent in order to obtain better
drying results. Using traditional
rinse aid improves drying.