FAQ

 The EU EPREL database provides information regarding dishwasher
performance. The database can be consulted directly using the QR code
on the dishwasher's energy label or via the following link
https://eprel.ec.europa.eu. In this case, you have to enter the name of the
model indicated on the data plate on the side of the door.
 For detailed information on the energy label: www.theenergylabel.eu.
In order for the water softening system to give fault-free service, the appliance
performs a regeneration cycle of the system at regular intervals.
The regeneration process consists of several stages. It starts at the end of the
last rinse cycle, after the amount of water indicated in the mains water
hardness setting has been reached during the wash cycle, and finishes at the
beginning of the following wash cycle.
The regeneration process increases the cycle time and consumption of water
and electricity.
Below is an overview of consumption of regeneration the softening system
using the Eco program with a water hardness setting of H2.
Water
consumption
according to
model
[refer to the
programs
table]
(litres)
Regeneration
frequency
(number of
cycles)
Water
consumption
during
regeneration
(litres)
Energy
consumption
during
regeneration
(Wh)
Duration of the
regeneration
process
(min)
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
At
the
end
of
the
last
rinse
At the
beginning
of the
following
wash
cycle
7 8
0.2
4
(10x0.4
litres)
0.3 1.2 6 4
8.5-9-9.5 6
10.5-12 5
