Operation Manual

Instructions for the User
37
9. PROBLEM IDENTIFICATION GUIDE
PROBLEM POSSIBLE CAUSE PROBABLE SOLUTION
Noisy during operation - see 'noises during operation'
section
The compressor starts to function too
often or functions continuously:
- insufficient cooling of the
compressor and the condenser:
- increase in surrounding
temperature;
- frequent or prolonged door
opening;
- freezer loaded with too many
fresh foods
- check that the back of the freezer
is properly ventilated as indicated
in paragraph '3.1 Choice of
location' and that the condenser is
not too dirty;
- freeze less food in one go;
The compressor does not function: - temperature control set at •.
- supply cable not connected to the
electricity supply;
- socket not providing any
electricity.
- connect the supply cable;
- contact your electricity supply
company
Insufficient cooling: - internal temperature control set
too low (1-2) (corresponds to a
higher temperature inside the
freezer);
- frequent or prolonged door
opening;
- the door does not close properly
- the door does not close
hermetically;
- increase in surrounding
temperature.
- Set the selector to a higher setting
(3-4).
- open the door less frequently and
for as little time as possible;
- check that the food packages are
arranged properly in the drawers
and are not preventing the door
from closing properly; also check
that the freezer is properly level on
the floor;
- check that the seal is closing
properly and is not damaged.
Problems opening the door
immediately after it has been closed:
- if you try to reopen the door
immediately after it has been
closed, you will need to exert
considerable force. This is due to
the low pressure created by the
cooling of the warm air which has
entered the freezer.