User Manual

Cleaning and maintenance
67
EN
The indicator light flashes and the
appliance has not sealed the bag after a
vacuum level 3 bag sealing cycle or the
indicator light flashes after a vacuum
level 2 bag sealing cycle or after a vacuum
level 3 sealing cycle for containers or the
indicator light turns on:
• The appliance warns you that the
product is too hot and / or that the bag
is too full.
Reset the alarm and press the select
cycle button.
Cool the product to 3°C and/or reduce
the amount of food in the bag and start a
new cycle if the previous cycle had not
been completed.
The indicator light turns on and the
appliance emits a beep.
• The lid has not been lowered or has not
been pressed against the chamber.
Close the lid; press it slightly in order to
start a new cycle.
• The vacuum adapter has not been
connected correctly.
Connect the adapter and start a new
cycle.
• Substantial loss of vacuum.
A pipe may have become detached.
Contact the technical assistance service.
The indicator light switches on and the
indicator light of the ON/OFF button
flashes:
• Excessive number of cycles carried out,
causing the oil in the pump to overheat.
• Allow the vacuum drawer to cool down
for at least 1 hour.
The indicator light turns on and the
appliance emits a beep:
• Absolute vacuum sensor fault.
Contact the technical assistance service.
If the problem persists, or for other
types of fault, contact your local
technical support centre.