User manual

Conversion Kit
9
EN
7 Burner and nozzle characteristics tables
To adjust the range for LP gas or to return to Natural Gas use, refer to the charts below.
Natural Gas AUX SR R UR2 int. UR2 ext.
QT (BTU)
4500 8000 12000 2500 15500
Injector Ø (mm)
0.90 1.20 1.52 0.75 1.80
QR (BTU)
1200 1600 2400 800 4200
LP AUX SR R UR2 int. UR2 ext.
QT (BTU)
4200 7500 11000 2500 15500
Injector Ø (mm)
0.60 0.80 0.98 0.48 1.15
QR (BTU)
1200 1600 2400 800 4200
By-pass (mm)
0.33 0.39 0.45 0.30 0.63
NOTE: Save the nozzles that were removed from the appliance along with these
instructions for possible future use.
WARNING
FIRE HAZARD
Use a soapy solution to check that it is leak-tight.
Never test for gas leaks with a match or other flames.
Failure to follow this instruction can result in loss of life or fire.