User manual
Installation
25
EN
1.7 For the installer
•  The plug must remain accessible after the 
installation is complete. Do not kink or 
trap the mains connection cable.
• The appliance must be fitted according 
to the installation diagrams.
• Do not attempt to turn or stress the 
threaded elbow on the manifold. You risk 
damage to this part of the appliance 
which may void the manufacturer’s 
warranty.
• Before leaving check all connections for 
gas leaks with soap and water. DO 
NOT use a naked flame for detecting 
leaks.
• Ignite all burners individually and 
concurrently to ensure correct operation 
of the gas valves, burner and ignition.
• Turn the gas knobs to the low position 
and observe stability of the flame for 
each burner individually and all together.
• In case the appliance fails to operate 
correctly after all checks have been 
carried out, refer to the Authorised 
Assistance Centre in your area.
• When satisfied with the appliance, 
please instruct the user on the correct 
method of operation.










