User manual
Cleaning and Maintenance
38
End of the Vapor Clean cycle
4. Open the door and wipe away the less 
stubborn dirt with a microfibre cloth.
5. Use a non-scratch sponge with brass 
filaments on hard to remove deposits.
6. In case of grease residues use specific 
oven cleaning products.
7. Remove the residual water inside the 
oven.
For improved hygiene and to avoid food 
being affected by any unpleasant odours, 
we recommend that the oven is dried using 
a fan-assisted function at 360°F for 
approximately 10 minutes.
3.5 Extraordinary maintenance
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with 
lukewarm water.
Replacing the internal light bulb
1. Completely remove all accessories from 
inside the oven.
2. Remove the rack/tray support frames.
3. Remove the bulb cover using a tool (e.g. 
a screwdriver).
We recommend wearing rubber 
gloves for these operations.
We recommend removing the 
door in order to make the manual 
cleaning of the parts that are 
difficult to reach easier.
Live parts
Danger of electrocution
• Unplug the appliance.
The oven is fitted with a 40W light 
bulb.
Pay attention not to scratch the 
oven cavity enamel.










