User manual

Use
25
EN
Programmed cooking
1. Keep the clock key pressed for a
few seconds. The display shows the
figures and the symbol
flashing between the hours and
minutes.
2. Press the clock key again. On the
display the digit
appear alternating with the digit
and the symbol
flashing under the minutes.
3. Use the value increase and value
decrease keys to set the required
minutes of cooking.
4. Press the clock key again. On the
display the digit
appear alternating with the current timen
digit and the symbol
flashing under the minutes.
5. Use the value increase and value
decrease to set the cooking end
time.
6. Select a function and a cooking
temperature.
7. Wait approx. 5 seconds without pressing
any key in order for the function to
activate. The current time and the symbol
will appear on the display.
The simbol disappear on the
display.
At the end of cooking the heating elements
will be deactivated. On the display, the
symbol turns off, the symbol
flashes and the buzzer sounds.
8. To turn the buzzer off, simply press one of
the programmer clock keys.
9. Press the clock key to reset the
programmer clock.
Programmed cooking is the
function which allows a cooking
operation to be started at a set
time and then ended after a
specific length of time set by the
user.