User manual
Conversion Kit
9
EN
6 Replacing the gas grill nozzle
1. Open the door and remove all 
accessories inside the oven.
2. Loosen the screws fastening the gas 
burner with grill to the upper part of the 
oven.
3. Push the burner until the nozzle is 
accessible.
4. Replace the nozzle with the most suitable 
one for the type of gas used using a 7 
mm socket wrench.
5. After having replaced the nozzle, put the 
burner back in its seat.
6. Tighten the burner fastening screws.
The tightening torque of the nozzle 
must be 4 Nm.
Take care not to damage the 
thermocouple or the igniter when 
doing this.










