User manual

Conversion Kit
8
5 Replacing the oven burner nozzle
1. Open the oven door and remove all of
the accessories from inside the oven.
2. Remove the shelf.
3. Remove the oven burner fastening screws
from the base.
4. Lift the burner at the side and pull it
towards you to remove it from its seat.
5. Replace the nozzle using a 7 mm socket
wrench; install the most suitable one for
the type of gas used.
6. After having replaced the nozzle, put the
burner back in its seat.
7. Tighten the burner fastening screws.
8. Replace the shelf in its seat.
Take care not to damage the
thermocouple or the igniter when
doing this.
The tightening torque of the nozzle
must be 4 Nm.
Take care not to damage the
thermocouple or the igniter when
doing this.