User manual
Installation
15
EN
1. Assemble the fastening bracket as shown 
in the figure. Join the two parts without 
tightening them too much since there will 
be other adjustments to make.
2. The bracket attachment should insert into 
one of the central slots at the rear.
3. After having positioned and leveled the 
appliance, move the bracket close to the 
rear of the appliance and anchor it to the 
floor.
4. Lower the bracket attachment until 
anchoring the appliance slot, tighten the 
nuts previously assembled. The anti-tip 
device works properly only if the bracket 
attachment is securely anchored to the 
appliance.










