User manual
Installation
14
4. Use 50 mm for the distance from the 
side of the appliance to the bracket 
holes.
5. Move the bracket onto the wall and 
mark the position of the holes to be 
drilled in the wall.
6. After drilling the holes in the wall, use 
wall plugs and screws to fasten the 
bracket to the wall.
7. Push the cooker towards the wall, and 
at the same time, insert the bracket in 
the plate fastened to the rear of the 
appliance.
Instructions for floor mounting 
(secondary system)
The secondary anti-tip device is to be 
attached to the floor when it is not possible 
to install the primary system. After having 
positioned and leveled the appliance the 
bracket has to be anchored to the floor and 
engaged in the slots at the rear of the 
appliance.
NOTE: According to the type of 
floor, the installer should supply the 
suitable fastening systems (Type of 
screw recommended 
3
/
8"
).










