User manual

ManualsBrandsSmeg ManualsCooking Appliances30 Inch Freestanding Professional Dual Fuel Range with 4 Sealed Burners, 3.6 Cu. Ft. Oven Capacity, Storage Drawer, Continuous Grates, Manual Clean, True European Convection, 10 Cooking Modes, and 20,000 BTU Super Burner: Olive Green

Installation

17

EN

U.S. and Canada installation / 4-wire

branch circuit

• Separate the green or yellow-green

wires from the white wires that extend out

of the end of the appliance cable.

• The ground wire must be connected first.

• Connect the green or yellow-green

ground wire from the appliance to the

ground wire in the junction box (green

colored wire) using UL/CSA listed wire

connectors. Do not connect the

grounding wire to the neutral wire in the

junction box.

• Connect the red and black leads from

the appliance to the matching color

wires in the junction box using UL/CSA

listed wire connectors.

• Connect the white wire from the

appliance to the neutral white wire in the

junction box using a UL/CSA listed wire

connector.

• Connect to a 20A fuse or circuit breaker.

Connect to copper wire, or, if

connection is made to aluminum house

wiring, use UL-listed or CSA-approved

connectors approved for joining

aluminum and copper wiring.

A cable from power supply bw black wires

B junction box gw white-green or yellow-green wires

C cable from range rw red wires

D UL/CSA listed conduit connector ww white wires

NOTE: Both leads coming out of

the range must be connected

according to the diagrams shown

in figures.