LP Conversion Kit Guide

ManualsBrandsSmeg ManualsCooking Appliances30 Inch Freestanding Professional Dual Fuel Range with 4 Sealed Burners, 3.6 Cu. Ft. Oven Capacity, Storage Drawer, Continuous Grates, Manual Clean, True European Convection, 10 Cooking Modes, and 20,000 BTU Super Burner: Black

1

2

3

4

5

6

7

Conversion Kit

6

3 Adaptation to different types of gas

To adapt the regulator to the type of gas used,

the following must be done:

1. Unscrew the cover of the pressure

regulator.

2. Unscrew the spring retainer from the cover.

3. Screw the spring retainer back on

according to the type of gas used (see the

following illustrations).

• Natural Gas: Set pressure to 5” W.C.P.

Incoming line pressure of 6” - 10 1/2”

W.C.P maximum.

• LP Gas: Set pressure to 10” W.C.P.

Incoming line pressure 11”- 13” W.C.P.

maximum.

• Incoming line pressure upstream from the

regulator must be 1” (2.5 cm) W.C.P.

higher than the manifold pressure in

order to check the regulator.

The range must be isolated from the gas

supply piping system by turning off the

respective manual shut-off valve during any

pressure testing of the gas supply piping

system at test pressures equal to or greater

than 1/2 PSIG (3.5 kPa).

4 Replacing the rangetop's burners

nozzles:

1. Remove all the grates and all the burner

caps (1) and heads (2);

2. Unscrew the burner nozzles with a 7 mm

socket wrench;