Installation Instructions

Installation
20
Assembling the backguard
The backguard must always be positioned
and secured correctly on the appliance.
1. Position the backguard above the top,
taking care to align the holes.
2. Secure the backguard to the top by
tightening screws.
3. For the two outermost screws, also
tighten the supplied spacers, as per
figure.
Positioning and levelling
• After making the gas and electrical
connections, screw on the four feet
supplied with the appliance.
The appliance must sit level on the floor to
ensure stability.
• Screw or unscrew the bottom part of the
foot until the appliance is stable and
level on the floor.
The backguard provided is an
integral part of the product; it must
be fastened to the appliance prior
to installation.
Heavy appliance
Risk of damage to the appliance
• Insert the front feet first and then the rear
ones.