Instruction manual

Use
86
4. Close the door.
5. Press the key for a few seconds;
Now press the key again. The
display will show the default target
temperature with the symbol
flashing.
6. Use the and keys to set the
minimum and maximum target
temperature values.
7. Wait a few seconds or press the key
to display the momentary probe
temperature.
Cooking will now proceed until the
momentary probe temperature is equal to
the target temperature setting.
Without preheating:
1. Open the door.
2. Insert the tray bearing the food with the
probe inserted.
3. Insert the probe's jack into the socket at
the side using the probe itself to open the
protective cover.
4. Set the probe cooking cycle as indicated
in steps 5, 6 and 7 in the previous
paragraph.
5. Set a manual cooking cycle with
temperature setting and cooking function
(see “Switching on the oven”).
When cooking with the probe is in
progress
• Minimum target temperature:
the momentary probe
temperature plus 2 °C.
• Maximum target temperature:
99 °C
When you are cooking with the
temperature probe, you cannot set
a programmed or timed cook
cycle.
When you are cooking with the
probe, the and keys have
no effect.