Instruction manual

Use
73
EN
Once the acceleration period is over the
power level will remain the same as the one
previously selected.
Multizone function
To activate the Multizone function:
1. Turn the front left and rear left cooking
zone knobs anticlockwise at the same
time and hold them at the M-A position
until a short beep is emitted.
2. Turn the front left cooking zone knob
back to the 0 position and turn the rear
left cooking zone knob until it reaches
position 9. A prolonged beep will be
emitted.
3. Use the front left cooking zone knob to
set the required power: this knob now
controls both the cooking zones that are
in use.
To deactivate the Multizone function:
• Put both knobs back to the 0 position (off).
If the power is reduced, by turning
the knob anti-clockwise, the
heating accelerator will
automatically be disabled.
This function can be used to
operate two cooking zones (front
and rear) simultaneously when
using pans like fish kettles or
rectangular pans.
The cooking zones with a
Multizone function are the front left
and the and the rear left cooking
zones.
This function automatically divides
the power equally between both
zones that are in use.