Technical data

49
•
Instructions for the user
•
9.5.1 Removing guide frames
Removing the guide frames and the self-cleaning panels enables the
sides to be cleaned more easily.
To remove the guide frames:
1 unscrew the two fastening pins of the frame
• • •
2 Pull the frame towards the inside of the oven.
•
9.5.2 Cleaning the door glazing
The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll; remove
stubborn dirt with a damp sponge and an ordinary detergent.
Do not use abrasive or corrosive detergents to clean the oven door glass panels (e.g. powder products,
spot-removers and wire sponges). Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven's glass doors since they may scratch the surface.
•
9.5.3 Cleaning the door seal
To keep the seal clean, use a non-abrasive sponge and lukewarm water. The seal should be soft and
flexible (with the exception of pyrolitic models).
In pyrolitic models, the seal may flatten over time and lose its original shape. To restore it, pinch the seal
all the way along its perimeter. This also helps remove any dirt on the seal.
• • • •