User Manual

10
Instructions for the user
4.1 Description of the controls on the front panel
4.1.1 Programming clock
The programming clock can be used to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Oven thermostat knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between 100° and 260°C.
When the red light beside the knob is flashing, it indicates that the oven is heating
up to reach the temperature set using the thermostat knob. Once the oven has
reached the selected temperature, the light stops flashing and remains lit steadily
until the oven is switched off.
4.1.3 Oven function knob
Turn the knob clockwise or anti-clockwise to select one of the functions described
below.
4.1.4 Hob control knob
Standard heating
The circle next to each knob indicates the cooking zone that will be controlled. To
switch a zone on, press the knob and turn it to the required position. Adjustment is
continuous, so the appliance functions when set to the intermediate values as well.
To switch off a zone, reset the knob to 0.
Double heating
The circle next to each knob indicates the cooking zone that will be controlled. To
switch the inner cooking zone on, press the knob and turn it to the required position.
To switch on both the inner and outer zone, turn the knob to / then
release it. The knob will return to the maximum intensity position for the hot plate.
To adjust the heat intensity, turn the knob anti-clockwise to the 0 position. To go
back to heating the inner zone only, reset the knob to 0 then turn it to the required
position. To switch off a zone, reset the knob to 0.
0
ECO
0
100
125
150
175
200
225
245
260
0
2
3
4
1