AS 63 CS Dryer Asciugatrice
1 Warnings Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. General Safety • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your machine. • Your machine is designed to stop operating in the event of power resuming after a power failure.
When available a drying rack could be used for such items. • Plastic articles such as shower caps or babies’ waterproof napkin covers should not be placed in a tumble dryer. • Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and rubber-coated tennis shoes should not be placed in a tumble dryer.
extended directly to the outdoors. There must be a small number of elbows as not to hinder air ventilation. C When you direct the water drain out, “Water Tank” warning LED will light up at the end of each program. • The hose should be attached to a height of maximum 80 cm. • You must be careful not the pinch or bend the hose. Electrical connection C The ventilation hose can be routed outdoors via a window or it can be connected to the air outlet in the bathroom.
3 Before drying Always follow the advice on the garment labels. With this dryer, dry only the laundry having a label stating that they are suitable for drying in a dryer by selecting the appropriate program.
4 Selecting a Program and Operating Your Machine Control panel 6 5 4 2 Sintetici Asciutto Pronto Armadio Tempo Stiro Programmato 10 min Pulire Filtri Asciugatura Svuotare Contenitore Pronto Stiro Asciutto Armadio Fine 7 1. On/Off button 2. Program selection knob 3. Start/Pause/Cancel button 4. Cancel Audio Warning 5. Program follow-up indicator 20 min 40 min Stop Allarme Acustico Avvio Pausa 60 min 1 Extra Asciutto Cotone Asciutto Armadio Pronto Stiro On/Off Delicati Refresh 3 6.
Turning the machine on Prepare machine for program selection by pressing the “On/Off” button. C Pressing the “On/Off” button does not necessarily mean the program has started. Press “Start/Pause/Cancel” button to allow the machine start the program. Program selection Decide the appropriate program from the table below which includes drying temperature in degrees. Select the desired program with the program selection button.
Program selection and consumption table Program table Programs Capacity (kg) Spin speed in washing machine (rpm) Approximate amount of remaining humidity Drying time (minutes) 1200-1000 % 60 130 900-800 % 60 150 1200-1000 % 60 80-60 Cottons / Coloreds 6 A Ready to Wear 3 6 900-800 % 60 100-80 1200-1000 % 60 130-100 900-800 % 60 130 1200-1000 % 60 80-60 900-800 % 60 80-60 800 % 50 80-60 600 % 50 130-100 800 % 50 60-30 600 % 50 60-30 1.
C If more than one LED light up or flash concurrently, it means there is malfunctioning or a failure (please see, Solution suggestions for problems). Auxiliary function Buzzer Cancel Models Equiped Your machine will send out an buzzer warning when the program comes to an end. If you do not want to hear this buzzing, you need to press the “Cancel Audio Warning” button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the program comes to an end.
Ending the program through canceling The program which is selected first will keep on going even if the position of the program selection button is changed. A new program can be selected and started after “Program cancel” is activated in order to change the drying program. In order to cancel the selected program; press “Start/Pause/Cancel” button for about 3 seconds. The “Filter cleaning”, “Water tank” and “End/ Anticreasing” warning LEDs will light up at the end of this period for reminding purposes.
5 Maintenance and cleaning Fluff filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Fluff Filter”. tank. To drain the water tank; Carefully remove the water tank by opening the kick plate cover/ pulling the drawer. C 1 Drain the water by opening the water tank cover. 2 If there is lint accumulation in the water tank cover, clean it and press to close. 3 Place the water tank into its seat.
6 Solution suggestions for problems Problem Cause Explanation / Suggestion Drying process takes too much time. Cover filter and filter drawer might have * Clean the cover filter and Filter drawer. not been cleaned. * Cover filter and filter drawer might Laundry come out wet have not been cleaned. at the end of drying. * Excessive laundry might have been loaded in. * It might have not been plugged in. * The loading door may be ajar.
