Technical data

Instructions for the user

10.EXTRAORDINARY MAINTENANCE

The oven requires periodic minor maintenance or replacement of parts subject

to wear, such as gaskets, light bulbs, etc. Specific instructions for each

operation of this kind are given below.

Before any intervention that requires access to live parts, disconnect the

appliance from the power supply.

If a problem cannot be resolved through ordinary maintenance or in case of

other types of fault, contact your local technical support centre.

10.1 Replacing the light bulb

If a light bulb needs to be replaced because it is

worn or burnt out, remove the guide frames;

see “9.5.1 Removing guide frames (where

present)”.

Then remove the bulb cover using a tool (e.g. a

screwdriver).

Remove the bulb by unscrewing (filament

bulbs) or pulling it out (halogen bulbs) in the

indicated direction. Replace the bulb with one

of the same type (25W for filament bulbs or

40W for halogen bulbs).

Press the cover down as far as it will go so that it attaches completely to the

bulb support.