Technical data

Instructions for the installer
40
Complete wiring up to power supply with an appropriately rated five-core
plug (see data plate) or, in case of operation from a 220-240V∼ power
supply, with a three-core plug. Make sure that plug and wall socket are of
the same type and are in conformity with regulations in force. Make sure
that the appliance is properly earthed. Before powering, check that the
power line is properly earthed. Avoid using adapters or shunters.
The manufacturer declines all responsibility for damage to persons
or things caused by non-observance of the above prescriptions or by
interference with any part of the appliance.
2.2 Mounting the rear top upstand
• Position the upstand above the top, taking care to align holes A with
holes B.
• Secure the upstand to the top by tightening screws C.
Warning: the rear upstand (or optional back panel) must be fitted to
prevent the rear wall from overheating.
2.3 Positioning and levelling of the appliance
Having carried out the electricity hook-up, level the appliance using the
four adjustable legs.