Quick Start Guide

1.Connecting devices
1.1
Connecting the Wecast wireless display receiver to the TV or projector with HDMI port
as follows:
Note: pls check whether the USB Port of TV or projector is workable or not.If not, please use
USB cable to connect the USB power adapter to charge the wecast wireless display receiver.
1.2 please set the TV or projector’s output mode to HDMI and connect with wecast display
receiver to watch the wecast menu.
2. Notice
2.1
If long time not use the wecast wireless display receiver, please unplug the usb power
cable to save electricity.
2.2
Please put the wecast wireless display receiver in a relatively good singal
environment,then it can be ensure that the interaction among the wecast wireless
display receiver, the android/iOS devices and WIFI router/hotspots have the good
bandwidth and low latency wireless signal.
2.3
please make sure that wifi singal is strong enough between wifi router,wecast wireless
display receiver and portable smart phone/laptop/windows8.1/Mac10.8 laptop.
2.4
The lastest firmware will be updated automatically time to time online while the wecast
wireless display receiver connecting well with internet.