Brochure

Rated pressure
range
Series
-0.100 to 1.000 MPa
1 MPa
0
-0.1 MPa
(-100 kPa)
ISE10
(positive pressure)
0.0 to -101.0 kPa
-101 kPa
0
ZSE10
(vacuum pressure)
-100.0 to 100.0 kPa
-100 kPa
100 kPa
0
ZSE10F
(compound pressure)
0.001 MPa0.1 kPa
Min. unit setting
1.5 MPa500 kPa
500 kPa
0.1 kPa
NPN or PNP open collector 2 outputs
NPN or PNP open collector 1 output + Analogue output (voltage)
Output
Set pressure
range
-0.105 to 1.050 MPa
-105.0 to 105.0 kPa
10.0 to
-
105.0 kPa
Mounting
Pressure range of the positive
pressure type expanded to
vacuum area.
Piping is possible from
two directions.
Secret code setting function
Resolution conversion function
Power-saving function
Standardized 2-output type.
 NPN or PNP open collector 2
outputs
 NPN or PNP open collector 1
output + Analogue output (1 to 5 V)
 Rated pressure range:
–0.100 to 1.000 MPa
1 MPa
0
-0.1 MPa
(-100 kPa)
Can be mounted closely in vertical direction.
One opening for all!
Panel mounting DIN rail mountingDirect mounting
Can be mounted closely in vertical direction.
One opening for all!
The flickering on the display can be eliminated.
1/1000
1/100
(Only the displayed value is changed, and there is no
effect on the accuracy.)
The set-value can be checked while the keys are locked.)
(Power consumption reduced by max 20%)
A function to prevent operation by anyone
other than the designated operator while the
keys are locked.
The display can be turned off to save the
power consumption.
An optional 3-digit value is entered.
The value disappears and decimal
points start flashing.
Improved visibility from multiple directions
Green light ON
Red light ON
: OUT 1 output
: OUT
2 output
The vacuum suction and burst pressure can be checked at a glance by indicator lights.
Multi-angle indicator
-100 kPa
100 kPa
0
Red light ON
OUT2
Green light ON
OUT1
OUT1 threshold
OUT2 threshold
Vacuum burst
pressure
Suction
pressure
<Application example>
Withstand
pressure
Features 1