Datasheet

Series ZPT Series ZPR Series ZPY
No.
Description
Brass
Conductive NBR, Conductive
silicon rubber,NBR, Silicon rubber,
Urethane rubber, Fluorine rubber
Material Note
Brass
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Electroless nickel plated
Lock ring
Pad
Adaptor
Brass
Buffer
Brass, PBT
Adaptor
Brass
Adaptor
q
w
e
r
t
y
Component Parts
Vacuum Pad/Components
Refer to p.3.9-61 for part nos. of e to y.
Replacement of Pad
q Pull the lock ring upward, and after lifting it to the adaptor, remove the
old pad by pulling it downward.
w While holding the lock ring in the raised position, place a new pad onto
the adaptor.
e Confirm that the pad is securely in place, and then return the lock ring
to its original position.
Maintenance of Pad
Since pads are essentially rubber, deterioration is unavoidable. The rate
of deterioration depends upon factors such as conditions of use,
environment and temperature. Regular maintenance should be
performed. If any damage, splitting, cracking or abrasion has occurred in
a pad which appears to be harmful, replace it immediately. Also, take care
not to damage the outside surface of the pad.
Construction
3.9-58
Series ZP