Datasheet

Series VM100/200

Specific Product Precautions 4

Be sure to read before handling.

Refer to back cover for Safety Instructions and “Handling Precautions for SMC Products”

(M-E03-3) for 3/4/5 Port Solenoid Valve Precautions.

Series VM-X219 How to Mount Panel

[Task 1] Removing the push button and fastening ring

Remove them from the body turning them counterclockwise in the

order of the push button and fastening ring.

Fastening ring

Push button

[Task 2] Mounting the valve to the panel

Insert the valve to the panel and ﬁ x it with a fastening ring.

Remove three spacers attached to the valve depending on the

panel thickness.

Spacer

Panel

[Task 3] Mounting the push button

Tighten the push button clockwise by hand and further tighten it

until load is applied.

Note) When the push button is not tightened enough, the valve may not

output correctly after operating the push button. In other cases, the

valve outputs temporarily, but when it is in the holding state, the

valve may stop outputting. In this situation, tighten the push button

again.