Specifications

CLI Management Guide
TigerAccess™ EE
98 SMC7824M/VSW
To disable the application of profile in specified port, use the following command.
Command Mode Description
line-config-profile NAME del
PORTS
Bridge Disables profile in specified port.
To delete configured profile, use the following command.
Command Mode Description
no line-config-profile NAME Bridge Deletes Profile.
5.3.4.2 Alarm config profile
Alarm config profile is a configured policy, which Alarm service is provided to clients with
using SNMP trap in case of system error. It is convenient way because it is possible to
configure standard of error checking, which varies according to service type, in each port.
Alarm config profile consists of Threshold of error, which clients configure. Same as stan-
dard in
5.3.3 VDSL Checking Errors of VDSL Port each error is checked every 15 minutes,
and SNMP trap is sent when it meets configured threshold.
To configure an alarm-config profile, perform the following steps.
Step 1
To configure alarm-config profile, you need to enter into Alarm–config Profile mode. Use
the following command
Command Mode Description
alarm-config-profile NAME Bridge
Opens alarm config profile mode
NAME: alarm-config profile name
The following is an example of entering into Alarm-config Profile mode to configure alarm
config profile named TEST
SWITCH# config terminal
SWITCH(config)# bridge
SWITCH(bridge)# alarm-config-profile TEST
SWITCH(bridge-alarm-config-profile[TEST])#
Meanwhile, use “exit” to exit from Alarm-config Profile mode.
Step 2
Configures detail of Profile. Use the following command.
Command Mode Description
thresh-15min-ess <0-900>
Configures duration of CRC, LOF, and LOS. The unit is
second.
thresh-15min-lofs <0-900>
Configures threshold of duration of LOF. The unit is
second.
thresh-15min-lols <0-900>
Alarm-
Config
Configures threshold of duration of LOL. The unit is
second.