Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 87
To enable/disable TCM of VDSL line port, use the following command. .
Command Mode Description
lre PORTS tcm {enable | disable} Bridge Configures TCM (default: enable)
To display configured TCM, use the following command.
Command Mode Description
show lre tcm [PORTS] Enable/Global/Bridge Shows the configured TCM.
5.3.2.10 Ham-band
The bandwidth that VDSL port of switch includes Ham band. It causes interruption in
VDSL line. To prevent this interruption, you can configure not to use Ham band in band-
width.
To disable specified Ham band for a port, use the following command.
Command Mode Description
lre PORTS ham-band {band1ㅣband2ㅣband3
ㅣband4ㅣband5ㅣband6ㅣband7ㅣband8ㅣ
band9ㅣband10ㅣband11ㅣband12ㅣband13ㅣ
band14ㅣband15ㅣband16ㅣband17ㅣband18
ㅣband19ㅣband20ㅣband21}
Bridge Disables specified Ham band.
If you configure Ham band at VDSL port, it is applied to all ports.
To enable Ham band of a port, use the following command.
Command Mode Description
no lre PORTS ham-band {all |
BAND NO}
Bridge Enables disabled Ham-band.
To confirm disabled Ham band, use the following command
Command Mode Description
show lre ham-band [PORTS] Enable/Global/Bridge Shows disabled Ham-band.
You can configure plural Ham bands, up to thirteen bands. For example, if you input
band1, band2, band3 in order, then three Ham bands.
!
!