Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 73
To disable the switch to generate a syslog message according to the number of the pack-
ets handled by CPU, use the following command.
Command Mode Description
no cpu statistics-limit {unicast |
multicast | broadcast} {PORTS |
all}
Disables the switch to generate a syslog message
according to the number of the packets handled by
CPU for each packet type.
all: all physical ports
no cpu statistics-limit all
{PORTS | all}
Enable
Global
Disables the switch to generate a syslog message
according to the number of the packets handled by
CPU for all packet types.
To display a configured value to generate a syslog message according to the number of
the packets handled by CPU, use the following command.
Command Mode Description
show cpu statistics-limit
Enable
Global
Bridge
Shows a configured value to generate a syslog mes-
sage according to the number of the packets handled
by CPU.
5.2.7.3 Protocol Statistics
To enables/disables the system to collect the statistics of the protocols, use the following
command.
Command Mode Description
protocol statistics {enable | dis-
able} [arp | icmp | ip | tcp | udp]
Global
Bridge
Enables/disables the system to collect the statistics of
the protocols. (ARP, ICMP, IP, TCP, UDP)
To display the statistics of the protocol, use the following command.
Command Mode Description
show protocol statistics avg-pkt
[PORTS]
Shows the statistics of the protocol for average pack-
ets.
show protocol statistics total
[PORTS]
Enable
Global
Bridge
Shows the traffic statistics of the protocol for total
packets.
To delete the collected statistics of the protocol, use the following command.
Command Mode Description
clear protocol statistics [PORTS]
Global
Bridge
Deletes the collected statistics of the protocol.