Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 71
5.2.7 Traffic Statistics
5.2.7.1 Packet Statistics
To display the traffic statistics of an Ethernet port, use the following command.
Command Mode Description
show port statistics avg-pkt
[PORTS]
Shows the traffic statistics of the average packet for a
specified Ethernet port.
show port statistics avg-pps
[PORTS]
Shows the traffic statistics per packet type for a speci-
fied Ethernet port.
show port statistics interface
[PORTS]
Shows the interface MIB counters of a specified
Ethernet port.
show port statistics rmon
[PORTS]
Shows the RMON MIB counters of a specified Ethernet
port.
show port statistics media-
adaptor [PORTS]
Enable
Global
Bridge
Shows the traffic statics per media adaptor unit of CO
VDSL port.
The following is the sample output of the show port statistics avg-pkt command with
the Ethernet port 25.
SWITCH(config)# show port statistics avg-pkt 25
============================================================================
Slot/Port| Tx | Rx
----------------------------------------------------------------------------
Time | pkts/s | bytes/s | bits/s | pkts/s | bytes/s | bits/s
============================================================================
port 25 -------------------------------------------------------------------
5 sec: 2 186 1,488 11 1106 8,848
1 min: 0 60 480 3 148 1,872
10 min: 0 6 48 1 15 1,184
SWITCH(config)#
To delete all collected statistics for an Ethernet port, use the following command.
Command Mode Description
clear port statistics {PORTS | all}
Enable
Global
Bridge
Deletes all collected statistics for an Ethernet port.