Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 49
4.2.5 TACACS+ Server
4.2.5.1 TACACS+ Server for System Authentication
To add/delete the TACACS+ server for system authentication, use the following command.
Command Mode Description
login tacacs server A.B.C.D KEY
Adds a TACACS+ server with its information.
A.B.C.D: IP address
KEY: authentication key value
no login tacacs server [A.B.C.D]
Global
Deletes an added TACACS+ server.
You can add up to 5 TACACS+ servers.
4.2.5.2 TACACS+ Server Priority
To specify the priority of a registered TACACS+ server, use the following command.
Command Mode Description
login tacacs server move
A.B.C.D <1-5>
Global
Specifies the priority of TACACS+ server.
A.B.C.D: IP address
1-5: priority of TACACS server
4.2.5.3 Timeout of Authentication Request
After the authentication request, the switch waits for the response from the TACACS+
server for specified time. To specify a timeout value, use the following command.
Command Mode Description
login tacacs timeout <1-100>
Specifies a timeout value.
1-100: timeout value for the response (default: 5)
no login tacacs timeout
Global
Deletes a specified timeout value.
4.2.5.4 Additional TACACS+ Configuration
The switch provides several additional options to configure the system authentication via
TACACS+ server.
TCP Port for the Authentication
To specify TCP port for the system authentication, use the following command.
Command Mode Description
login tacacs socket-port
<1-65535>
Specifies TCP port for the authentication.
1-65535: TCP port
no login tacacs socket-port
Global
Deleted the configured TCP port for the authentication
i