Specifications

CLI Management Guide
TigerAccess™ EE
46 SMC7824M/VSW
4.1.10.2 Auto System Rebooting
The switch reboots the system according to user’s configuration. There are two basis for
system rebooting. These are CPU and memory. CPU is rebooted in case CPU Load or In-
terrupt Load continues for the configured time. Memory is automatically rebooted in case
memory low occurs as the configured times.
To enable the auto system rebooting, use the following command.
Command Mode Description
auto-reset cpu <50-100> <1-100>
TIME
Configures the system to restart automatically in case
an average of CPU or interrupt load exceeds the con-
figured value during the user-defined time.
50-100: average of CPU load
1-100: average of interrupt load
auto-reset memory <1-120> <1-
10>
Configures the system to restart automatically in case
memory low occurs as the configured value.
1-120: time of memory low
1-10: count of memory low
no auto-reset {cpu | memory}
Bridge
Disables auto system rebooting.
To display a current configured auto system rebooting, use the following command.
Command Mode Description
show auto-reset cpu
Shows a current configured auto system rebooting by
CPU.
show auto-reset memory
Enable
Global
Bridge
Shows a current configured auto system rebooting by
system memory.