Specifications

CLI Management Guide
TigerAccess™ EE
42 SMC7824M/VSW
The commands starting with the same character are applied by inputting only the starting
commands. For example, if you input show, all the commands starting with show are
applied. To delete a configured security level, use the following command.
Command Mode Description
no privilege
Deletes all configured security lev-
els.
no privilege view level <0-15> {COMMAND | all}
no privilege enable level <0-15> {COMMAND |
all}
no privilege configure level <0-15> {COM-
MAND | all}
no privilege interface level <0-15> {COMMAND
| all}
no privilege {flow | policer | policy} level <0-
15> {COMMAND | all}
no privilege bridge level <0-15> {COMMAND |
all}
no privilege rmon-alarm level <0-15> {COM-
MAND | all}
no privilege rmon-event level <0-15> {COM-
MAND | all}
no privilege rmon-history level <0-15> {COM-
MAND | all}
no privilege dhcp-pool level <0-15> {COM-
MAND | all}
no privilege dhcp-pool-class level <0-15>
{COMMAND | all}
no privilege dhcp-option82 level <0-15>
{COMMAND | all}
no privilege dhcp-class level <0-15> {COM-
MAND | all}
Global
Delete a configured security level on
each mode.
To display a configured security level, use the following command.
Command Mode Description
show privilege Shows a configured security level.
show privilege now
Enable
Global
Bridge
Shows a security level of current mode.
The following is an example of creating the system account test0 having a security level
10 and test1 having a security level 1 with no password.
SWITCH(config)# user add test0 level 0 level0user
Changing password for test0
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.