Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 41
To define the security level and its authority, use the following command.
Command Mode Description
privilege view level <0-15>
{COMMAND | all}
Uses the specific command of Privileged EXEC View
mode in the level.
privilege enable level <0-15>
{COMMAND | all}
Uses the specific command of Privileged EXEC Enable
mode in the level.
privilege configure level <0-15>
{COMMAND | all}
Uses the specific command of Global Configuration
mode in the level.
privilege interface level <0-15>
{COMMAND | all}
Uses the specific command of Interface Configuration
mode in the level.
privilege {flow | policer | policy}
level <0-15> {COMMAND | all}
Uses the specific command of Rule Configuration
mode in the level.
privilege bridge level <0-15>
{COMMAND | all}
Uses the specific command of Bridge Configuration
mode in the level.
privilege rmon-alarm level
<0-15> {COMMAND | all}
privilege rmon-event level
<0-15> {COMMAND | all}
privilege rmon-history level
<0-15> {COMMAND | all}
Uses the specific command of RMON Configuration
mode in the level.
privilege dhcp-pool level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Pool Configura-
tion mode in the level.
privilege dhcp-pool-class level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Pool Class Con-
figuration mode in the level.
privilege dhcp-option82 level
<0-15> {COMMAND | all}
Uses the specific command of DHCP Option 82 Con-
figuration mode in the level.
privilege dhcp-class level
<0-15> {COMMAND | all}
Global
Uses the specific command of DHCP Class Configura-
tion mode in the level.
The commands that are used in low level can be also used in the higher level. For exam-
ple, the command in level 0 can be used in from level 0 to level 14.
The commands should be input same as the displayed commands by show list. There-
fore, it is not possible to input the commands in the bracket separately.
SWITCH# show list
clear arp
clear arp IFNAME
clear cpe stat-error (PORTS|)
clear ip arp inspection statistics (vlan VLAN_NAME|)
clear ip dhcp authorized-arp invalid
clear ip dhcp leasedb A.B.C.D/M
clear ip dhcp leasedb all
(Omitted)