Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 347
The following is an example of enabling the jumbo frame capacity.
SWITCH(bridge)#jumbo-frame enable
SWITCH(bridge)# show jumbo-frame
Name : Current/Default
port01 : 9188/ 1518
port02 : 9188/ 1518
port03 : 9188/ 1518
port04 : 9188/ 1518
port05 : 9188/ 1518
port06 : 9188/ 1518
port07 : 9188/ 1518
port08 : 9188/ 1518
port09 : 9188/ 1518
port10 : 9188/ 1518
--more--
SWITCH(bridge)#
8.12 Bandwidth
Routing protocol uses bandwidth information to measure routing distance value. To con-
figure bandwidth of interface, use the following command.
Command Mode Description
bandwidth BANDWIDTH Interface
Configures bandwidth of interface, enter the value of
bandwidth.
The bandwidth can be from 1 to 10,000,000 Kbits. This bandwidth is only valid for routing
information implement and it does not concern any physical bandwidth.
To delete a configured bandwidth, use the following command.
Command Mode Description
no bandwidth BANDWIDTH Interface
Deletes configured bandwidth of interface, enter the
value.
8.13 Maximum Transmission Unit (MTU)
Maximum value for the length of the data payload can be transmitted. You can set a
maximum transmission unit (MTU) with below command.
Command Mode Description
mtu <68-1500> Sets a MTU size.
no mtu
Interface
Returns to the default MTU size.
i