Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 339
For managing the stacking function, the port connecting Master switch and Slave switch
must be in the same VLAN.
8.7.2 Designating Master and Slave Switch
Designate Master switch using the following command.
Command Mode Description
stack master Global Sets the switch as a master switch.
After designating Master switch, register Slave switch for Master switch. To register Slave
switch or delete the registered Slave switch, use the following command.
Command Mode Description
stack add MACADDR [DE-
SCRIPTION
]
Registers slave switch.
MACADDR: MAC address
stack del MAC-ADDR
Global
Deletes slave switch.
To make stacking operate well, it is required to enable the interface of Slave switch. The
switches in different VLANs cannot be added to the same switch group.
You should designate Slave switch registered in Master Switch as Slave Switch. To des-
ignate Slave switch, use the following command.
Command Mode Description
stack slave Global Sets the switch as a slave switch.
8.7.3 Disabling Stacking
To disable stacking, use the following command.
Command Mode Description
no stack Global Disables stacking.
8.7.4 Displaying Stacking Status
To display the status of stacking, use the following command.
Command Mode Description
show stack
Enable
Global
Bridge
Shows a configuration of stacking.
i
i