Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 299
8.4.12 ERP Trap
To enable the system to generate ERP trap message, use the following command.
Command Mode Description
erp domain DOMAIN-ID trap {lotp | ulotp | mul-
tiple-rm
| rmnode-reachability}
Bridge
Enables the system to send ERP Trap
message in case of the event.
To disable the system to generate ERP trap message, use the following command.
Command Mode Description
no erp domain DOMAIN-ID trap {lotp | ulotp |
multiple-rm | rmnode-reachability}
Bridge
Disables the system to generate ERP
trap
The following options hold the configuration of the ability to transmit LOTP, ULOTP, Multi-
ple RM or RMNode reachability Traps.
– lotp: Enables/disables an RM node to transmit the LOTP traps.
– ulotp: Enables/disables an RM node to transmit the ULOTP (Undirectional Loss Of
Test Packets) traps.
– multiple-rm: Enables/disables an RM node to transmit the trap in case of Multiple
RM nodes.
– rmnode-reachability: Enables/disables a normal node to transmit RMnode
Reachablility traps.
8.4.13 Displaying ERP Configuration
To display a configuration of ERP, use the following command.
Command Mode Description
show erp [domain <1-64>]
show erp state
Enable
Global
Bridge
Shows the information of ERP
1-64: domain ID