Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 29
To open DHCP Option Configuration mode, use the command. Then the system prompt
will be changed from SWITCH(config)# to SWITCH(dhcp-opt[NAME])#.
Command Mode Description
ip dhcp option format NAME Global
Opens DHCP Option Configuration mode to configure
DHCP options.
Tab. 3.7 is the main commands of DHCP Option Configuration mode.
Command Description
attr Configures the attribute for option field in the DHCP packet.
Tab. 3.6 Main Command of DHCP Option Configuration Mode
3.1.7 DHCP Option 82 Configuration Mode
In DHCP Option 82 Configuration mode, you can configure DHCP option 82 for DHCP re-
lay agent. This feature enables network administrators to manage IP resources more effi-
ciently.
To open DHCP Option 82 Configuration mode, enter the ip dhcp option82 command,
then the system prompt will be changed from SWITCH(config)# to SWITCH(config-
opt82)#.
Command Mode Description
ip dhcp option82 Global
Opens DHCP Option 82 Configuration mode to config-
ure DHCP option 82.
To open DHCP Option 82 Configuration mode, use the service dhcp command in the
Global Configuration mode first!
Tab. 3.7 is the main commands of DHCP Option 82 Configuration mode.
Command Description
policy Configures the policy for option 82 field in the DHCP packet.
system-remote-id Configures a system remote ID.
system-circuit-id Configures a system circuit ID.
trust Configures a option82 packet of policy
Tab. 3.7 Main Command of DHCP Option 82 Configuration Mode
3.1.8 Interface Configuration Mode
In Interface Configuration mode, you can configure Ethernet interfaces. To open Interface
Configuration mode, enter the interface command, then the system prompt will be
changed from SWITCH(config)# to SWITCH(config-if)#.
Command Mode Description
interface INTERFACE Global Opens Interface Configuration mode.
!