Specifications

CLI Management Guide
TigerAccess™ EE
296 SMC7824M/VSW
8.4.5 Selecting the Node
To configure an ERP domain as RM Node, use the following command.
Command Mode Description
erp domain DOMAIN-ID mode rm Bridge Configures ERP node mode as RM node.
To configure an ERP domain as normal node, use the following command.
Command Mode Description
erp domain DOMAIN-ID mode
normal
Bridge Configures ERP node mode as normal node.
8.4.6 Protected Activation
When you finish configuring specific ERP domain with Domain ID, domain name, primary
port and secondary port, you should activate the ERP domain to apply to the system. To
activate an ERP domain, use the following command.
Command Mode Description
erp domain DOMAIN-ID
activation activate
Bridge Configures ERP Protected Activation.
To deactivate an ERP domain, use the following command.
Command Mode Description
no erp domain DOMAIN-ID
activation
erp domain DOMAIN-ID activa-
tion deactivate
Bridge Deactivates an ERP domain. (default)
8.4.7 Manual Switch to Secondary
A secondary port is supposed to be blocked as unused link for traffic while ERP runs
without any link failure. While a primary port forwards the traffic to other nodes. But you
can configure a primary port to be blocked as a secondary port role. A secondary port is
automatically changed to forward the traffic.
To manually configure a primary or secondary port as an unused link that should be
blocked for traffic in normal condition of Ethernet ring, use the following command.
Command Mode Description
erp domain DOMAIN-ID manual-
switch primary
Unblocks a primary port and blocks a secondary port of
ERP domain as RM node (default)
erp domain DOMAIN-ID manual-
switch secondary
Bridge
Blocks a primary port and unblocks a secondary port of
ERP domain as RM node.