Specifications

CLI Management Guide
TigerAccess™ EE
294 SMC7824M/VSW
8.4.4 Configuring ERP Domain
To realize ERP, you should fist create domain for ERP. To create the domain, use the fol-
lowing command.
Command Mode Description
erp domain DOMAIN-ID
Creates ERP domain and opens ERP domain configu-
ration mode.
DOMAIN-ID: <1-64>
no erp domain DOMAIN-ID
Bridge
Deletes ERP domain.
8.4.4.1 ERP Domain Name
After ERP domain creation, you can specify its name, To specifiy ERP domain name, use
the following command.
Command Mode Description
name NAME Configures ERP domain name.
no name
ERP
Domain
Deletes the configured ERP domain name.
8.4.4.2 Primary and Secondary Port
To configure Primary Port and Secondary port of a specific domain ID, use the following
command.
Command Mode Description
primary-port PORT Configures primary port of an ERP domain
secondary-port PORT
ERP
Domain
Configures secondary port of an ERP domain
Primary port and secondary port should be different.
To delete ERP domain ID’s primary or secondary port, use the following command.
Command Mode Description
no primary-port Deletes primary port of an ERP domain
no secondary-port
ERP
Domain
Deletes secondary port of an ERP domain
8.4.4.3 Protected VLAN
ERP enabled switches within same ring send/receive data packets to/from each other us-
ing their protected VLAN.
To configure a protected VLAN of an ERP domain, use the following command.
Command Mode Description
protected-vlan VLAN Configures a protected VLAN of ERP domain.
no protected-vlan [VLAN]
ERP
Domain
Deletes configured protected VLAN of ERP domain
i