Specifications

CLI Management Guide
TigerAccess™ EE
28 SMC7824M/VSW
Tab. 3.4 shows main commands of Bridge Configuration mode.
Command Description
lacp Configures LACP.
mac Configures a MAC table.
mirror Configures a port mirroring.
oam Configures EFM OAM.
port Configures Ethernet port.
spanning-tree Configures Spanning Tree Protocol (STP).
trunk Configures a trunk port.
vlan Configures VLAN.
Tab. 3.4 Main Command of Bridge Configuration Mode
3.1.5 DHCP Pool Configuration Mode
In DHCP Pool Configuration mode, you can configure general functions of DHCP per
each DHCP pool. The switch supports multiple DHCP environments with this pool based
DHCP configuration.
To open DHCP Pool Configuration mode, enter the ip dhcp pool command, then the sys-
tem prompt will be changed from SWITCH(config)# to SWITCH(config-dhcp[POOL])#.
Command Mode Description
ip dhcp pool POOL Global
Opens DHCP Pool Configuration mode to configure
DHCP.
To open DHCP Pool Configuration mode, use the service dhcp command in the Global
Configuration mode first!
Tab. 3.5 shows main commands of DHCP Pool Configuration mode.
Command Description
default-router Configures the default gateway of the pool.
dns-server Configures a DNS server.
range Configures the range of IP addresses.
Tab. 3.5 Main Command of DHCP Pool Configuration Mode
3.1.6 DHCP Option Configuration Mode
In DHCP Option Configuration mode, you can configure DHCP option. You can define
DHCP options that are carried in the DHCP communication between DHCP server and
client or relay agent. A specific DHCP option can be defined by its format type, length and
value.
!