Specifications

Management Guide CLI
TigerAccess™ EE
SMC7824M/VSW 27
3.1.3 Global Configuration Mode
In Global Configuration mode, you can configure general functions of the system. You can
also open another configuration mode from this mode.
To open Global Configuration mode, enter the configure terminal command, and then
the system prompt will be changed from SWITCH# to SWITCH(config)#.
Command Mode Description
configure terminal Enable Opens Global Configuration mode.
Tab. 3.3 shows main commands of Global Configuration mode.
Command Description
bridge Opens Bridge Configuration mode.
dns Sets a DNS server.
dot1x Configures 802.1X authentication.
exec-timeout Sets an auto log-out timer.
help Shows a description of the interactive help system.
hostname Sets a host name of the system.
interface Opens Interface Configuration mode to configure a specified interface.
mvr Configures MVR.
ntp Configures NTP.
passwd Sets a system password.
qos Configures QoS.
rmon-alarm Opens RMON Configuration mode to configure RMON alarm.
snmp Configures SNMP.
ssh Configures SSH.
stack Configures a system stacking.
syslog Configures a syslog.
threshold Sets a system threshold.
Tab. 3.3 Main Command of Global Configuration Mode
3.1.4 Bridge Configuration Mode
In Bridge Configuration mode, you can configure various Layer 2 functions such as VLAN,
STP, LACP, EFM OAM, etc.
To open Bridge Configuration mode, enter the bridge command, then the system prompt
will be changed from SWITCH(config)# to SWITCH(bridge)#.
Command Mode Description
bridge Global Opens Bridge Configuration mode.