Specifications

CLI Management Guide
TigerAccess™ EE
272 SMC7824M/VSW
8.3.6.5 Link Type
A port that operates in full-duplex is assumed to be point-to-point link type, while a half-
duplex is considered as a shared port. .
To configure the link type of port, use the following command.
Command Mode Description
spanning-tree port PORTS link-
type
{point-to-point | shared}
Bridge
Specifies a link-type for a designated port
PORTS: port number
point-to-point: full-duplex
shared: half-duplex
To delete a configured link type of port, use the following command.
Command Mode Description
no spanning-tree port PORTS link-type Bridge Deletes a configured link type.
8.3.6.6 Displaying Configuration
To display the configurations of STP, use the following command.
Command Mode Description
show spanning-tree
Enable
Global
Bridge
Shows all configurations of STP
show spanning-tree active [detail]
Shows STP information on active inter-
face:
detail: detailed STP information (as
option).
show spanning-tree blockedport Shows information of the blocked ports
show spanning-tree detail [active] Shows detailed information of STP.
show spanning-tree inconsistentports
Shows information of root-inconsistency
state.
show spanning-tree bridge [{ address | detail |
forward-time | hello-time | id | max-age | proto-
col
| priority [system-id] }]
Shows information of the bridge status
and configuration
show spanning-tree root [{ address | cost |
detail | forward-time | hello-time | id | max-age |
port | priority [system-id] }]
Shows the status and configuration for
the root bridge.
show spanning-tree port PORTS [{ active [de-
tail
] | cost | detail [active] | edgeport | inconsis-
tency
| rootcost | state | priority }]
Shows STP information of specified
port.
show spanning-tree summary [totals]
Bridge
Shows a summary of STP:
totals: the total lines of STP